Joyelife Provic S3 510 / eGo Variable Voltage Mod w/ Clearomizer - Silver, Stainless Steel, 3~6V

1. Battery specification:

1) Provic S3 works with 18650 lithium-ion battery.

2) Recharge: take out the lithium-ion battery and recharge with dedicated charger till it's full charged.

 

2. Working parameters:

1) Resistance >0.8ohm atomizer is recommended;

2) Quiescent current: <100uA;

3) With RMS and average voltage output function, voltage output error is +/-0.1V;

 

3. Basic functions:

1). Power on: OLED shows "JOYELIFE", Vibration motor shake one time and enter the key lock status.

2). Limited time protection: When smoking time exceeds the setting time, output will be forced to be shut down.

3). The OLED screen will show "Please Change Battery" while the voltage is below 3.4v, it means the voltage is too low to be smoking, the device need to be recharged.

 

4. Features:

1. RMS and Mean average voltage output: Output voltage is 3.0~6.0v and error is +/-0.1V, Automatically match the atomizer resistance and to achieve the same amount of smoking.

2. Button / Knob: 31 voltages can be adjusted.

3. Resistance measurement function: Test the actual resistance of atomizer.

4. Display functions: Display the current battery level, voltage output, atomizer resistance, puffs, remaining puffs and smoking timeout.

5. Reverse battery protection function: Control Board will start protection function to protect the Components and battery in case of the battery reversed.

6. Low voltage alarm: the OLED will alarm while the voltage is low 3.4V to protect the battery.

 

5. Operation Method:

1. Lock button: in the locked position, press 5 times in a row to unlock, the OLED will display JOYELIFE and start the normal working status. In normal working conditions, press 5 times to lock. It can not be smoke in lock status.

2. Voltage increases: In the voltage display interface, turn around the button clockwise, the voltage adjusts from 3.0V to 6.0V in 0.1v increments.

3. Voltage decrease: In the voltage display interface, turn around the button anticlockwise, the voltage adjusts from6.0V to 3.0V in 0.1v decrease.

4. Setup menu: In sleep mod status or voltage display, press the button 3 times in a row will enter setup mode, rotate the encoder to select, then press the button.

5.Puff information: To enter the Setup mode, turn around the encoder to select "Puff info"

then press the button to set the puff info.

5.1) To enter the submenu of the set puff, turn around the encoder to select the "Set puff", then press the button to set the puffs.

When the cursor blinks, turn around the encoder to move the cursor, or press the button to fix the cursor and setting the numeral value that from 0001-9999 puffs what the user want. after setting successfully, select Exit to exit submenu and return to the previous menu.

5.2) Reset puff: to enter the submenu of the set puff, then press the button to select the "Reset the puffs" to clear the puffs.

5.3) To enter the submenu of the set puff, turn around the encoder to select the "Total puff" to show the total puff being smoked.

5.4) Puff time: to enter the submenu of the set puff, turnaround the encoder to select the puff time 6s~30s.

 

6. Lock time:

In the setting mode, turn around the encoder and select the lock time for 30 Mins / 60 Mins / Never. after setting successfully, select Exit to exit submenu and return to the previous menu.

 

7. Vibration:

In the setting mode, , turn around the encoder and select vibration for setting the vibration of motor or on/off. after setting successfully, select Exit to exit submenu and return to the previous menu.

 

8. Mobile:

In the setting mode, turn around the encoder and select the power bank mode or on/off. after setting successfully, select Exit to exit submenu and return to the previous menu. When the device is on mobile power supply mode, it can not be used for smoking but only for recharging for other devices, and the output voltage is around 6v, the device will exit the mobile on while low voltage of battery or the resistance is lower than 5 ohms.

 

9. Screen:

In the setting mode, turn around the encoder and select the screen to setting the light time of OLED, options 5 sec/10 sec/30 sec/60sect. after setting successfully, select Exit to exit submenu and return to the previous menu.

 

10. Output:

In the setting mode, turn around the encoder and select the output for setting output.

Turn about the encoder again and press the button for setting the output mode options RMS/Mean/. After setting successfully, select Exit to exit submenu and return to the previous menu.

 

11. My device:

In the setting mode, turn around the encoder and select "My device" for setting the device info. Turn around the encoder again and press and the button for setting the info of name/user info/ohm, after setting successfully, select Exit to exit submenu and return to the previous menu.

 

12. Sleep:

In the setting mode, turn around the encoder and select the Sleep, device will quit setting menu for sleep.

 

13. Exit:

In the setting mode, turn around the encoder and select Exit to exit the setting mode of the device.

 

14. Short-circuit protection:

The screen will display atomizer short in case of short circuit at the output in smoking mode or mobile power supply mode. You have to check the electrode carefully for both atomizer and battery body.

 

15. Low load protection:

Screen will display low resistance while the output resistance is lower than 1.2ohmin smoking mode or lower than 5ohm in the mobile power supply mode, and the device will exit output automatically.

 

 

 

3FVape is a professional electronic cigarette retail and wholesale shop. We provide new and cool e-cig products at affordable price. All products will be shipped from China now. If you find a product to be authentic, then it is not a clone. For any question about product title Joyelife Provic S3 510 / eGo Variable Voltage Mod w/ Clearomizer - Silver, Stainless Steel, 3~6V, please contact us. We also encourage you to leave review of e-cig products on 3FVape.

 

Discounted at only: US$ 47.89